1 6

Bluefire

JCU60ZN 1/2 lb 40 sticks Brass Brazing Rods containing small amounts of tin and silicon

JCU60ZN 1/2 lb 40 sticks Brass Brazing Rods containing small amounts of tin and silicon

$16.99 USD
$16.99 USD
Oferta Agotado
Los gastos de envío se calculan en la pantalla de pago.

Envío y manipulación:

Ubicación del artículo:Houston, Texas, Estados Unidos

Envíos a: en todo el mundo

Excluye:Barbados, Guayana Francesa, Polinesia Francesa, Guadalupe, Libia, Martinica, Nueva Caledonia, Reunión, Federación Rusa, Ucrania, Venezuela

Por lo general, se enviará dentro de 1 día hábil después de recibir el pago liquidado.

Politica de devolucion:

Este artículo se puede devolver en su estado original para obtener un reembolso completo o un reemplazo dentro de los 30 días posteriores a la recepción.

Ver todos los detalles
BlueFire JCu60Zn (60% Copper based Brass), or some other brass alloys in the series. It has a melting point of about 890-905°C. The brass alloy is suitable to braze low carbon steel, cast iron, nickel alloys and hard alloy parts, the joint has higher intensity and better plasticity. So, for manually hand welding thin wall steel or iron parts, brass alloy is the best choice. However, the Zinc inside it will evaperate if high heating for a long time, so brass alloy is not recommended to be used for production line oven welding, to avoid the evaperated Zinc to contaminate the inside of the oven.
  • Good Fluidity：Tin can improve the fluidity of molten brass, increase the permeability of welding Copper liquid and improve the wettability.
  • Excellent Mechanical Properties：Silicon can effectively control the evaporation of zinc and eliminate the porosity, so as to get good weld seam and satisfactory mechanical properties.
  • Scope of Application：The brass alloy is suitable to braze low carbon steel, cast iron, nickel alloys and hard alloy parts, the joint has higher intensity and better plasticity.
  • Attention：The Zinc inside it will evaperate if high heating for a long time, so brass alloy is not recommended to be used for production line oven welding, to avoid the evaperated Zinc to contaminate the inside of the oven.
  • It has a melting point of about 890-905°C.